Harbormaster
Marine Outboard Drive Model SW-3150-C
Standard
Unit General Specifications
|
Item |
Feature |
Description |
|
1 |
Model: Type: Origin: |
Harbormaster Marine, Inc.,
Model SW-3150-C Marine propulsion unit for
on deck installation. Manufactured in USA |
|
2 |
Engine: |
Manufactured by Cummins
Engine Co., USA |
|
a) |
Model: |
6BTA 5.9 |
|
b) |
Type: |
Six (6) cylinder, inline
turbocharged marine industrial diesel engine |
|
c) |
No. of Strokes: |
Four (4) stroke |
|
d) |
Flywheel hp/rpm: |
153 hp @ 2200 rpm (112.0
kw @ 2200 rpm) continuous |
|
e) |
Cooling System: |
Water cooled, radiator
type |
|
3 |
Steering Range: |
Three hundred sixty
degrees |
|
4 |
Propeller Speed: |
435 @ 2200 engine rpm. |
|
5 |
Gearboxes: Reduction Ratio: |
Manufactured by
Harbormaster Marine, Inc. 5.05:1 overall |
|
6 a) b) c) d) |
Stem: Standard Length: Maximum Length: Minimum Length: Stem, Raise Angle: |
(From engine mounting to
centerline of propeller.) 1854 mm (73²) 2032 mm (94²) Additional lengths available 1524 mm (60²) Ninety degrees |
|
7 a) b) c) |
Propeller: Diameter & Pitch: No. of Blades: Thrust: |
Manganese Bronze, right
hand 1117 mm (44.0²) x 533 mm (21.0²) Three (3) blades 1388 kg (3060 lb) |
|
8 |
Controls: |
Full power hydraulic
steering system and full hydraulic power elevating system. |
|
9 a) b) |
Safety Features: |
“Automatic kick up,” if
stem strikes a submerged object. Engine automatic and
emergency shutdown is available. |
|
10 |
Chassis: |
Welded construction of
rectangular tubing for stiffness and long life. |
|
11 |
Hydraulic Tank: |
Integral part of chassis. |
|
12 |
Fixation System: |
Bolt on type, requires no
welding. |
|
13 |
Weight of Assembly: |
3.25 m ton wet (7165 lb) |
|
14 a) b) c) |
Dimensions Length: Width: Height: |
Front of frame to end of
fairwater nut: 2229 mm (87.75²) 1962 mm (77.25²) Deck to top of air
cleaner: 2057 mm (81²) |
|
15 |
Electrical System
Specifications: |
12 (twelve) VDC with
starting motor, battery and charging alternator, battery, and cables. |
|
16 |
Optional In-Base Tank: |
147.5 liters (39.0 US
gallons), sufficient for 5.0 working hours at rated speed and load. |
MJB
Harbormaster
Marine Outboard Drive Model SW-3150-C
Optional
Equipment
|
Item |
Description |
|
1 |
Single remote control
freestanding console suitable for the independent control and monitoring of
one (1) propulsion unit. The console will include plug in cables between the console and propulsion units. Standard console is equipped with "joy stick" lever steering and elevation, propeller angle indicator, throttle lever, engine tachometer, clutch engage/disengage switch, oil pressure and water temperature indicator lights, start/stop switch, panel light dimmer, hold-down system indicator lights, nameplates, and epoxy paint. Price includes up to 20
feet of connecting cable to allow control from console. * Other lengths available. |
|
2 |
Auxiliary fuel tank 454.32
liters (120 US gallons), sufficient for 15.4 working hours at rated
speed. |
|
3 |
Spare propeller - 44² x 21² Manganese Bronze,
3-blade, right hand - bored to fit propeller shaft. |
|
4 |
Set of lifting cables to
enable the marine propulsion unit to be lifted onto/off of barge by a crane
with a single hook. |
|
5 |
Special tools to include
propeller wrench, propeller seal installation tool, and air pressure test
tool. |
|
6 a) b) |
Kim-Hotstart engine water
heater Model TPS-101GT8-000, 120V, single phase, 1000 watts, with
thermostatic range of 80 degrees F to 100 degrees F. Base mounted with external hoses. Kim-Hotstart push in type
block heater Model CUB-101FP, 120V, single phase, 1000 watts, heat shield and
11 foot cord, without thermostat.
Unit does not require external hose connections. |
|
7 |
Engine
oil/fuel/air/hydraulic filters for 4000 hours operation. |
|
8 |
Spark arrester exhaust silencer. |
MJB
Rev
December 04 SW-3150-C Unit Specification
- SH\Harbormaster Files